<img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=593372994460473&amp;ev=PageView&amp;noscript=1">
FREE STANDARD SHIPPING on all orders $100+ with code FREESHIP100

How to Empty an Onfloor EZV Sander Vacuum Bag

One of the cause for fire hazard is when you leave the sawdust inside the vacuum bag. These sawdust that are captured inside the bag are flammable. This means that the vacuum bag needs to be emptied every after the job is done. Aside from that, if you’re cleaning up after sanding down concrete or plastering for example, the smaller dust particles will clog up the pores in the bag. This in turn will significantly reduce the air permeability and performance of the appliance. With this article, we will walk you through how easy it is to empty the Vacuum Bag of an OnFloor OF16S. 

 

Needed Tools

 

Trash Bin

How-to-Empty-an-Onfloor-OF16SEZV-Vacuum-Bag-materials

 

 

Empty an Onfloor OF16S EZV Vacuum Bag

 

Lift the cover

Before we start, please make sure the machine is not plugged into the power source. Utilize the lockout tagout procedure, and refer to the EZV manual.

Release vacuum hold-down clamps and lift the cover away from canister.

How-to-Empty-an-Onfloor-OF16SEZV-Vacuum-Bag-lift-cover

 

 

Remove the bag

Lift out the inner cloth collection bag. There's a clip on the bottom of the collection bag that may need to be turned upright in order to remove the bag.

How-to-Empty-an-Onfloor-OF16SEZV-Vacuum-Bag-renive-the-bag

 

 

Empty the contents

Slide the clip off the bottom of the bag, then empty the contents into the trash.

How-to-Empty-an-Onfloor-OF16SEZV-Vacuum-Bag-empty-contents

 

 

Reinstall the bag

Slide the clip back onto the bag, re-install onto the vacuum cap, and snap down both clamps.

How-to-Empty-an-Onfloor-OF16SEZV-Vacuum-Bag-Reinstall-bag

 

 

And that's it! You're all set! You now have emptied your vacuum bag. To know how to replace the vacuum filter of your OnFloor OF16S Vacuum Sander, you can check out this article

 

 

If you feel that there is something wrong with your equipment and you can't follow through the steps, you can always contact Onfloor so we can help you out. 

Now that you know how to replace the brush strips of your OnFloor OF16S EZV Sander Pad, you can also check our article about maintaining  a dustless job-site while grinding - When polishing a concrete floor or sanding a deck, it's important to try to minimize the dust, especially when the area being polished or grinded has people in it. You can also check our online store and compare products and find what suits you best. 

 

 

YOU CAN ALSO CHECK THE FULL VIDEO OF THE TUTORIAL HERE:

 

 

Transcription - How to Empty an Onfloor OF16SEZV Vacuum Bag

This instructional video will show you how to empty a vacuum bag on an EZV Sander.

Be sure to have a trash bin nearby.

It is important to understand not to leave sawdust in the filter bag after using the sander. Sawdust can spontaneously combust and cause a fire hazard.

Before we start, please make sure the machine is not plugged into the power source. Utilize the lockout tagout procedure, and refer to the EZV manual.

Release vacuum hold-down clamps and lift the cover away from canister.

Lift out the inner cloth collection bag. There's a clip on the bottom of the collection bag that may need to be turned upright in order to remove the bag.

Slide the clip off the bottom of the bag, then empty the contents into the trash.

Slide the clip back onto the bag, re-install onto the vacuum cap, and snap down both clamps.

 

 

Previous post

0 comments